Laz Diaz – Routing Configuration & Router Administration for Cisco CCNA

This course is over 10 hours in length and will cover everything from connecting to a router, configuring administrative tasks on the router, learning the routers internal components such as RAM, ROM, NVRAM and FLASH;…
 

Laz Diaz – Routing Configuration & Router Administration for Cisco CCNA

 
Routing Configuration & Router Administration for Cisco CCNA
This course will cover and prepare you for the Routing portion of Cisco’s, CCNA (200-120) certification exam.

This course is over 10 hours in length and will cover everything from connecting to a router, configuring administrative tasks on the router, learning the routers internal components such as RAM, ROM, NVRAM and FLASH; learning how to manipulate the Registers on the router, backing up configurations, using the CDP protocol, and all aspects of Static, Default and Dynamic routing.
DISCLAIMER: Please note that the simulators/emulators used in this course are not part of the course. It is the students responsibility to have these to practice with. The Cisco Packet Tracer and/or VIRAL (Virtual Internet Routing Lab) are Cisco proprietary software and can only be obtained through Cisco. It is up to each student to obtain the simulator/emulator of their choice to study along with this course.
Students will get a thorough understanding of how the routing process actually works and they will also learn how to configure all internetworking components using the Cisco Packet Tracer (link attached for download), look for it under external .
Students will also be configuring RIPv2, EIGRP and OSPF and understand how to manipulate each routing protocols attributes to meet the requirements of the network.
This is a lecture based course using the Touch-IT Technology Smart board, which will make learning very interactive and engaging
Hands on labs will be used to drill down the concepts learned in each lecture using the Cisco’s Packet Tracer.
My method will make you feel like you are sitting in a classroom environment and give you the most needed hands on experience!
Handouts will be available to facilitate learning and practice.
This course is designed to help the student become comfortable with the routing concepts and router administration…but it will also help in preparing them for any networking certification or Computer Science Degree; not to mention the fact, that for those already in the field, it will further

improve routing decisions in their particular networks.

Your Instructor

Laz Diaz

This can be the year to achieve your goals if you are serious about your certs!
If you are determined, ambitious and hungry for a new beginning…then this should be your year
…and how better to start or end the year than to get an IT Certification…Especially a Cisco CCNA, CCNP, Microsoft or a Network+ certification.
Whether you are interested in the CCNA, the CCNP, Network+ or you just want to understand the key topics for these, taking one or ALL my courses, will get you a lot closer to that goal.
But, don’t take my word for it…please look at the FREE previews (they are available in all my courses) and see for yourself.
However, keep in mind that I’m also an author and you can find my books on AMAZON by searching under Lazaro Diaz.
NOW…what you wanted to know about me but were afraid to ask:
If you are tired of the same old methods of learning and want someone that is pretty much unconventional, but at the same time will provide you with an enjoyable learning experience in layman’s terms…then please preview my courses and you will discover that I am your guy.
Get immediately download Laz Diaz – Routing Configuration & Router Administration for Cisco CCNA
I am a Network Engineer with almost two (2) decades in the field and the teaching industry.
So, if anyone can get you certified it’s me!
My teaching experience stems from teaching at institutions like Palm Beach Community College, New Horizons, Florida Career College (now Anthem College) and The Academy of South Florida.
However, here in GlobED.net, I bring the classroom to you.
Courtesy of the internet, I have been teaching students from all over the world and all walks of life…. thank goodness for technology 😉
Having been on all sides of the spectrum; as a student, a teacher/trainer, and in the field, I believe this uniquely qualifies me to understand you.
I know firsthand what you have been exposed to as opposed to what you really want to accomplish. These two are sometimes extremely conflicting and frustrating. That is why I teach in the manner I do and can relate to your rejection of the Status Quo.
Because I also do private contracting, I have extensive experience in helping and/or teaching corporate employees at Miami Dade County employees, MetroPCS (now T-Mobile), The Florida Marlins, Ulysse Nardin, Alberta Water Department (Canada), The Assurant Group, The US Airforce, Hospital personnel & Attorney’s firms. I’ve guided them to be able to acquire their IT certifications or general knowledge in IT and Networking.
However, my expertise also extends to being able to teach applications as well. YES…I am also an application instructor and qualified to teach Word, Excel, PowerPoint, and Access. This, of course, includes the MOS (Microsoft Office Specialist) certification.
As you can see, I am a multifaceted person and consider myself to be an eternal student as well.
Remember that I too must keep up with technology since these changes seem to be daily, if not hourly.
I teach in an unconventional way that allows students to understand the subject matter and can, therefore, not only prepare them for a Cisco certification exam but help them apply my methods in the real world.
I strive to give the student a greater opportunity to be able to compete in the current job markets.
Do I go above and beyond what is needed for a certification?…YES, I do…because it’s not only about getting a certification, but it’s also about making sure that you, the student, are prepared for a job interview and/or maintaining your current job by enhancing your skills.
This is where I step in and make sure that you are prepared for whatever comes your way and make you become an asset to your employer.
Everyone has different requirements and I make sure, or at least I try, to provide information for most scenarios.
My classes and/or courses are very simple and that’s how I like to teach. I truly believe in “KISS”…NO, I don’t want to kiss you…this means “keep it simple stupid” –
If things are kept simple, easily explained in a way that the student can grasp quickly and retain the information…then I have achieved my goal.
For those that do not know me yet, you may not be used to my style of teaching, but you will soon get accustomed to it 🙂
I’m very laid back, I try to make learning fun and I teach in layman’s terms…no physics jargon or mumbo jumbo in my teachings.
My courses are very interactive and extremely dynamic…you will not find my lectures monotone or boring, because falling asleep, for lack of excitement, is just NOT an option and NOT who I am.
Need convincing?
Then just look for yourself at my video previews, which I always provide on ALL my courses. Therefore, you can then determine if I’m the right guy to help you get your industry-specific certifications.
I certainly hope that after a careful review of my credentials & testimonials (you can Google me you know) …and see if I’m the Cisco Instructor you’re looking for!
Laz
Network Engineer, Cisco, Microsoft, CompTIA Instructor, Author &

Motivational Evangelist
Author of:“The Only IP Book You Will Ever Need!” and “CCNA Routing and Switching 200-125 Certification Guide: The ultimate solution for passing the CCNA certification and boosting your networking career”, now on AMAZON or Packt Publishing

Course Curriculum

Introduction to the Routing Course

Intro to Course (4:00)

The Process of Routing

Understanding the Routing Process (15:39)
Default Routing (16:25)
Static Routing (21:30)

Dynamic Routing with RIPv2

Dynamic VS. Static Routing (10:14)
The RIPv2 Routing Protocol (8:59)
Configuring RIPv2 Basics (27:34)
Config Default info Sub command in RIPv2 (9:29)
Tweaking Timers in RIPv2 (11:17)
Passive-Interface Command with RIPv2 (20:36)
RIPv2 Static Routes as Backup (19:55)
RIPng Basics (13:29)

Dynamic Routing With EIGRP

Understanding Basics EIGRP (10:19)
Deep with EIGRP (10:04)
Config EIGRP with Variance Command (21:53)
Passive interface with EIGRP (16:33)
Max Paths in EIGRP (7:53)
Bandwidth on Interfaces (15:29)

Dynamic Routing With OSPF (UPDATED)

OSPF Multiple Area using Area 0 (25:56)
Multi-Area OSPF using Virtual Links (22:54)
OSPF Passive Interface Command (14:51)
OSPF Multiple Configuration Types (16:48)
OSPF Maximum Path Command (7:11)

Introduction to Routing

CCNA 640-802 or CCNAX 200-120 Certification (22:09)
Using the Packet Tracer Simulator (23:49)
Routers IOS and using the CLI (17:17)
Routers IOS and using the CLI Part2 (35:57)
Routers IOS and using the CLI Part3 (17:18)
Administering the Routers IOS Part1 (22:03)
Administering the Routers IOS Part2 (25:19)
Administering the Routers IOS Part3 (13:26)

Get immediately download Laz Diaz – Routing Configuration & Router Administration for Cisco CCNA

Routing Basics

Difference between Routed and Routing Protocols (4:37)
What does the term Routing mean? (22:53)
The IP Routing Process (17:31)
Static and Default Routing Part1 (34:59)
Static and Default Routing Part 2 (49:04)

Dynamic Routing

The basics of Routing Protocols (15:49)
Distance – Vector Routing Protocols (25:43)
Routing Information Protocol (RIP) (33:31)
Using Ripv2 and Static Routes Together (30:02)

Enhanced Interior Gateway Routing Protocol (EIGRP)

Introduction to EIGRP (30:30)
Sec4Lec13P2a Introduction to EIGRP (21:55)
Sec4Lec13P2b Introduction to EIGRP (16:48)
Sec4Lec14 EIGRP Lab (39:42)

Open Shortest Path First (OSPF)

Introduction to OSPF (38:02)
Configuring OSPF (42:21)
Router Administrating and Routing exam